Low-temperature short-axis cut-off valve factory will introduce to you: Low-temperature globe valves are easy to use in the desiliconization workshop and pipelines that are easy to coke in the production of alumina Bayer. A direct-flow stop valve or a direct-flow throttle valve with a high-quality alloy seal pair. For water supply and heating projects in urban construction, cut-off valves, balance valves or plunger valves can be used for pipelines with a smaller nominal diameter, such as pipelines with a nominal diameter of less than 150mm.

The holding point of the cryogenic globe valve.
(1) The structure is simpler than the gate valve, and it is more convenient to manufacture and maintain.
(2) The sealing surface is not easy to wear and scratch, and the sealing performance is good. There is no relative sliding between the valve disc and the sealing surface of the valve body when opening and closing, so the wear and scratch are not serious, the sealing performance is good, and the service life is long.
(3) When opening and closing, the stroke of the disc is small, so the height of the stop valve is smaller than that of the gate valve, but the structural length is longer than that of the gate valve.
(4) The opening and closing torque is large, the opening and closing is laborious, and the opening and closing time is long.
Our company is a professional Low-temperature short-axis cut-off valve factory, please contact us if you need.