
35MPa cylinder port valve
Technical characteristics:
① 3D modeling is adopted for strength design of the valve body, and with reliable calculations plus professional finite element analysis, whether overall structure, flow paths, and materials of the valve body meet the performance requirements is verified.
② For valve body raw materials, we signed technical agreements with domestic famous manufacturers to customize materials with better mechanical properties and elongation than those of national standard machines.
③ With external waterproof design, external water vapor is prevented from entering the valve body to damage the electrical components.
④ Each seal is made of imported hydrogenated nitrile rubber, which has better and more stable sealing effect for hydrogen medium.
⑤ Spring material with high strength and high hardness, fatigue resistance and good corrosion resistance are selected, and professional software is used to conduct finite element analysis of the spring in the design stage of the cylinder port valve to ensure spring compression rate, stability and reasonable fatigue design.
⑥ FEP cable line of domestic famous brand is selected, with rated voltage of 600V, and applicable temperature of -60~+200℃.
(7) The same types of electrical connectors and circuit protector components as imported brands are selected to improve product stability and ensure electrical over-voltage protection.
⑧ The valve flap gasket is made of PEEK material with excellent performance from the internationally known brand of high performance plastics.
The 35MPa high-pressure hydrogen cylinder valve for vehicles is specially designed for the vehicle-mounted hydrogen supply system, with a power supply voltage of 12/24VDC. It integrates electromagnetic actuators, manual shut-off valves, combined pressure relief devices, temperature sensors and other components to control the output of hydrogen in high-pressure gas cylinders and ensure the safety of the system.
Model |
QPK-A |
Remark |
|
Explosion-proof protection level |
ExdIICT6 IP65 |
|
|
Work pressure |
15℃下35MPa |
|
|
Max-pressure |
43.75MPa |
|
|
Min-pressure |
0.5MPa |
|
|
Min burst pressure |
140MPa |
|
|
Opening time |
<0.35s |
|
|
Closing time |
<0.15s |
|
|
Temperature range |
-40℃~+85℃ |
|
|
PRD melting temperature |
110℃±5℃ |
|
|
Quality |
1000g |
|
|
Requirements for driving solenoid coils |
DC coil voltage |
24V |
12V |
DC coil power |
8.5W |
|
|
Coil working status |
Continuous |
|
|
Transient protection voltage |
48V |
48V (Adjustable) |
|
Coil dielectric strength |
≥10MΩ (Under 1000V voltage) |
|
|
Temperature sensor |
Range -50℃~+150℃(NTC) |
|
|
Other import and export minimum diameter |
Φ6.3mm |
|
|
Working medium |
Hydrogen according to ISO14687 |
|
|
Leak rate (inside and out) |
<10Ncc/h |
|
|
Reference standard |
GB/T 35544 |
|
Technical characteristics:
① 3D modeling is adopted for strength design of the valve body, and with reliable calculations plus professional finite element analysis, whether overall structure, flow paths, and materials of the valve body meet the performance requirements is verified.
② For valve body raw materials, we signed technical agreements with domestic famous manufacturers to customize materials with better mechanical properties and elongation than those of national standard machines.
③ With external waterproof design, external water vapor is prevented from entering the valve body to damage the electrical components.
④ Each seal is made of imported hydrogenated nitrile rubber, which has better and more stable sealing effect for hydrogen medium.
⑤ Spring material with high strength and high hardness, fatigue resistance and good corrosion resistance are selected, and professional software is used to conduct finite element analysis of the spring in the design stage of the cylinder port valve to ensure spring compression rate, stability and reasonable fatigue design.
⑥ FEP cable line of domestic famous brand is selected, with rated voltage of 600V, and applicable temperature of -60~+200℃.
(7) The same types of electrical connectors and circuit protector components as imported brands are selected to improve product stability and ensure electrical over-voltage protection.
⑧ The valve flap gasket is made of PEEK material with excellent performance from the internationally known brand of high performance plastics.
Address of Guotai Road factory area: No. 228 North Guotai Road, Yangshe Town, Zhangjiagang City, Jiangsu Province
Address of Fuxin Road factory area:
No. 19-1, Fuxin Road, Yangshe Town, Zhangjiagang City, Jiangsu Province
Address of R&D Center:
No. 25, Zhuyuan Road, Huqiu District, Suzhou City, Jiangsu Province
Postcode:
215637
Phone:
+86 188 6266 9331
E-mail:
wukeming@furuiva.com

Furui Valve WeChat public account